Chemicals

Applications

Products

Diols

CARPOL® PGP-400

CARPOL® PGP-400 is a propylene glycol initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to the lower viscosity of b-side material while helping control crosslinking. In addition, it may also be utilized in a number of C.A.S.E. applications. Carpol® PGP-400 is polymerized solely with propylene oxide for controlled reactivity.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-1000

CARPOL® PGP-1000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 1000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-1000 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-2000

CARPOL® PGP-2000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-2000 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-2012

CARPOL® PGP-2012 s a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 2000. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-2000. Main applications include C.A.S.E., however, Carpol® PGP-2012 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-3000

CARPOL® PGP-3000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 3000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-3000 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-3815

CARPOL® PGP-3815 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 3800. This diol is a copolymer of propylene oxide and ethylene oxide. Main applications include C.A.S.E., however, Carpol® PGP-3815 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-4000

CARPOL® PGP-4000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-4000 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

CARPOL® PGP-4025

CARPOL® PGP-4025 (reactive Diol) is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-4000. Main applications include C.A.S.E., however, Carpol® PGP-4025 may also be included as a component in other urethane products and formulations.

End Use Applications

  • Coatings
  • Sealants
  • Binders
  • Caulks
  • Adhesives
  • Elastomers
  • Spray Coatings
  • Sport Surfaces

Diols can be acidified to a pH of 5.5-6.5 upon request.